Roof Pitch Calculator
Enter what you know about the roof: rise and run, an angle, a pitch or a grade. You get the other three, with a drawing.
https://flxcode.com/roof-pitch-calculator/
Example conventional (4/12 to 9/12)
pitch
| Angle | 22.62 degrees |
|---|---|
| Percent grade | 41.7% |
| Rafter length factor | 1.0833 (per 1 of run) |
| Roof area multiplier | 1.0833 |
| Hip and valley factor | 1.4743 (per 1 of common run) |
The rafter length is the plumb-cut to plumb-cut length along the slope. Add the overhang and the ridge board allowance yourself.
No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.
Problem or idea? Email us
Quick start
- Pick what you know: rise and run, the angle, a pitch such as 6/12, or a percent grade.
- Type the numbers. Rise and run can be in any unit as long as both use the same one.
- Read the pitch, angle and grade, and watch the drawing change.
- Add the run to the ridge or the footprint area if you want a rafter length or a roof area.
Common pitches
Computed by the same engine as the tool above.
| Pitch | Angle | Grade | Area multiplier | Type |
|---|---|---|---|---|
| 2/12 | 9.5 degrees | 16.7% | 1.014 | low slope (under 4/12) |
| 4/12 | 18.4 degrees | 33.3% | 1.054 | conventional (4/12 to 9/12) |
| 6/12 | 26.6 degrees | 50% | 1.118 | conventional (4/12 to 9/12) |
| 8/12 | 33.7 degrees | 66.7% | 1.202 | conventional (4/12 to 9/12) |
| 10/12 | 39.8 degrees | 83.3% | 1.302 | steep (over 9/12) |
| 12/12 | 45 degrees | 100% | 1.414 | steep (over 9/12) |
The formulas
- Pitch:
x = rise / run x 12 - Angle:
arctan(rise / run), so 12/12 is 45 degrees - Grade:
rise / run x 100 - Slope factor:
square root of (1 + (x / 12)^2) - Hip or valley factor:
square root of (2 + (x / 12)^2)
The slope factor is the length of the slope for a run of 1. Multiply a run by it for the rafter, and a footprint area by it for the roof surface.
Numbers this uses
Every constant the tool uses is listed here with its source. Where a number varies, you can edit it in the tool.
- Pitch is rise per 12 in of run. the roofing convention, 6/12 means 6 in up for every 12 in across.
- Angle is atan(rise / run). plain trigonometry, 6/12 is 26.57 degrees.
- Slope factor is sqrt(1 + (x/12)^2). Pythagoras on a 12 in run, multiplies a run into a rafter length and a footprint into a roof area.
- Roofing square is 100 sq ft. the unit shingles are sold by, 3 bundles usually cover one.
- Hip and valley factor is sqrt(2 + (x/12)^2). a hip runs on the diagonal of the plan, so its run is 1.414 times the common run.
A house worked through
A 24 ft wide house has a 12 ft run from the wall to the ridge. At 6/12, the factor is 1.118, so each rafter runs 13.42 ft along the slope. A 24 ft by 40 ft footprint is 960 sq ft, which becomes about 1,073 sq ft of roof, or 10.7 squares. Overhangs, dormers and waste are on top of that.
Common mistakes
- Using the span instead of the run. The run is half the width of a symmetric gable roof.
- Measuring the rise along the slope. Rise is straight up, and run is level.
- Reading the angle off a phone level that is lying on a curled shingle. Use a straight board.
- Entering the grade as a pitch. 50% grade is 6/12, not 50/12.
Your numbers stay in this page and are not uploaded. We count events without cookies (details).
FAQ
What is roof pitch?
Pitch is how steep a roof is. In the US it is written as rise over 12 of run. A 6/12 roof rises 6 in for every 12 in it goes across. It is the same idea as a slope, with the run fixed at 12.
How do I calculate roof pitch?
Measure a rise and a run along the same level line, then use rise / run x 12. A rise of 5 over a run of 12 is a 5/12 pitch, or 22.6 degrees. If the run is not 12, the tool scales it for you.
What is a 6/12 pitch in degrees?
26.57 degrees, or a 50% grade. The tool converts in both directions. A 30 degree roof is 6.93/12, and a 75% grade is 9/12.
What is the pitch multiplier?
It is the factor that turns a flat footprint into a sloped roof surface: the square root of 1 + (rise/12)^2. For 6/12 it is 1.118. A 24 ft by 40 ft house with a 6/12 roof has a 960 sq ft footprint, a roof area near 1,073 sq ft and about 10.7 roofing squares, before overhangs.
How long is a rafter?
Multiply the run by the same factor. With a 12 ft run to the ridge at 6/12, the rafter is 13.42 ft along the slope. Add the overhang and subtract half the ridge thickness for the cut length.
What pitch is low slope, and what is steep?
Under 4/12 is low slope, where shingles need extra underlayment and a membrane or metal roof may suit better. From 4/12 to 9/12 is conventional. Above 9/12 is steep, and roofers need extra gear to work on it.
How do I measure my roof pitch from the ground or an attic?
In an attic, hold a level 12 in out from a rafter and measure straight up from it to the rafter. That number is the x in x/12. From outside, a pitch gauge, a phone level on a ladder against the slope or a photo of the gable end all work.
Is anything I type uploaded or saved?
No. The sums run in your browser. Your numbers are not put in the address bar, not stored and not counted. Only your choice of US or metric units is remembered in this browser.
More from FLXCode
Stair CalculatorNew
Number of risers, riser height, tread depth, total run and stringer length, with a check against IRC limits.
Board Foot CalculatorNew
Board feet from thickness, width and length for a list of boards, with an optional price and cost.
Paint CalculatorNew
Gallons of paint for a room: walls, doors and windows left out, coats, ceiling and primer.
Concrete CalculatorNew
Cubic yards, premix bags and ready-mix for slabs, footings, columns and steps, with waste included.