Circumference Calculator
Say what you know about the circle: radius, diameter, area, or an angle for an arc. Get the length around it.
https://flxcode.com/circumference-calculator/
Example Circle
inches, circumference
The formula with your numbers
C = 2 × π × r
C = 2 × π × 5 = 31.4159 in
| Radius | 5 in |
|---|---|
| Diameter | 10 in |
| Area of the circle | 78.5398 in² |
The circumference in other units
| Feet | 2.61799 |
|---|---|
| Yards | 0.872665 |
| Millimeters | 797.965 |
| Centimeters | 79.7965 |
| Meters | 0.797965 |
No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.
Problem or idea? Email us
Quick start
- Choose what you know: the radius, the diameter, the area, or a radius and an angle for an arc.
- Type the number and pick the unit.
- Read the circumference. The radius, diameter and area of the same circle sit below it, and so does the length in other units.
- Switching "what you know" keeps the same circle, so you can move between the modes.
Worked examples
Each line comes from the engine behind the tool.
| Circle | Radius | Circumference | Area |
|---|---|---|---|
| Radius 5 in | 5 | 31.416 | 78.54 |
| Diameter 10 in | 5 | 31.416 | 78.54 |
| Bicycle wheel, 26 in across | 13 | 81.681 | 530.929 |
| Dinner plate, 6 in radius | 6 | 37.699 | 113.097 |
| Round table, 4 ft across | 2 | 12.566 | 12.566 |
| Tree trunk with a cross-section of 0.1 m² | 0.178 | 1.121 | 0.1 |
The formulas
- From the radius:
C = 2 x π x r - From the diameter:
C = π x d - From the area:
r = √(A / π), thenC = 2 x π x r - Arc of θ degrees:
arc = θ / 360 x 2 x π x r, and the chord is2 x r x sin(θ / 2)
The diameter is twice the radius. Pi is the same number for every circle, so the circumference is always a bit more than three times the width.
Arcs and chords
An arc is part of a circle's edge. Its length depends on the angle at the center. A quarter circle, 90 degrees, has a quarter of the circumference. The chord is the straight line joining the two ends of the arc. It's shorter than the arc, and the gap grows with the angle.
Builders use arcs for curved paths, arched windows and bent trim. Take the radius of the curve and the angle it covers, and you have the length of material to cut. Add the sector area from the tool if you also need to fill the shape.
Numbers this uses
Every constant the tool uses is listed here with its source. Where a number varies, you can edit it in the tool.
- Pi is 3.14159265.... The circumference of a circle divided by its diameter. The tool uses the full double-precision value.
- One inch is 25.4 mm exactly. Set by the 1959 international yard and pound agreement.
- One foot is 12 in, or 0.3048 m exactly. Same 1959 agreement.
- Angle is 360 degrees in a full turn. The usual unit for arcs. Radians are not used here.
Common mistakes
- Using the radius where the formula wants the diameter. The circumference then comes out half as long.
- Giving an area in feet when the unit is inches. The area field is read as the unit squared.
- Entering the angle in radians. The arc field takes degrees from 0 to 360.
- Rounding pi to 3 for a quick estimate and then expecting a precise length.
Your sizes stay in this page and are not uploaded. We count events without cookies (details).
FAQ
How do I find the circumference of a circle?
Multiply the diameter by pi, or the radius by 2 x pi. A circle 10 in across has a circumference of 31.4159 in. The formula line in the tool shows your own numbers.
How do I find the circumference from the area?
Find the radius first with r = √(A / pi), then use 2 x pi x r. An area of 0.1 m² gives a radius of 0.1784 m and a circumference of 1.121 m. Choose "From area" in the tool.
How do I measure around something round without a tape?
Measure across it, through the middle, and multiply by pi. A round table 4 ft across measures 12.57 ft, or 3.83 m, around the edge. A string wrapped once around works too: that length is the circumference.
How far does a wheel travel in one turn?
One circumference. A 26 in bicycle wheel rolls 81.68 in, which is 6.81 ft or 207.5 cm, per revolution. Count the turns and multiply to get the distance.
How do I find the length of an arc?
Choose "Arc length", then type the radius and the angle in degrees. The arc is angle / 360 x circumference. A 90 degree arc of a circle with radius 10 is 15.708, and the straight chord between its ends is 14.1421.
What value of pi does the calculator use?
The full double-precision value, 3.141592653589793. Rounding pi to 3.14 shortens a circumference by about 0.05%, which is 1.6 mm for every meter of diameter. The result is rounded only for display.
How much edging do I need around a round flower bed?
Measure across the bed and multiply by pi. A bed 8 ft across needs 25.1 ft of edging, so buy a little more for cuts. Flexible edging sold in 20 ft rolls covers it with one roll.
Is anything I type uploaded or saved?
No. The sums run in your browser. Your sizes are not put in the address bar, not stored in this browser and not counted. We only count which mode and unit you used.
More from FLXCode
Area CalculatorNew
Area of a rectangle, triangle, circle, trapezoid, parallelogram, ellipse, sector or polygon, with the formula.
Cylinder Volume CalculatorNew
Volume of a cylinder or pipe in cubic units, liters and US gallons. Radius or diameter, formula shown.
Volume CalculatorNew
Volume of a cube, box, cylinder, cone, sphere, hemisphere, pyramid, capsule or tube, with liters and gallons.
Triangle CalculatorNew
Solve any triangle from three values: sides, angles, area and more, drawn to scale with the steps.