FLXCode Green Noise

FLXCode apps

Appearance

Green Noise

Press Play. Mid-range, centred near 500 Hz. Our own recipe, see below.

Our own mix, not a standard: pink noise limited to about 100 Hz to 3 kHz, centred near 500 Hz.

Sleep timer

Stopped

Starts quiet on purpose. Keep the speaker away from your ears, and well away from a baby's cot. Nothing is uploaded: the sound is made in your browser.

No sound?
  • iPhone: check the ring/silent switch and the media volume.
  • Check the system volume and which output is selected (speakers, headphones, Bluetooth).
  • Bluetooth headphones switch to call mode while a microphone is open: sound becomes mono and dull.
  • A mono audio setting in accessibility makes left and right sound the same. A web page can't detect it.
  • Another tab or app may be using the audio. Close it and press Play again.

No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.

Problem or idea? Email us

What green noise is

Green noise is not a standard colour. White, pink and brown are defined by their slope; green has no agreed definition, and descriptions usually say "noise around the middle of the spectrum, near 500 Hz". Ours is pink noise through a 100 Hz high-pass and a 3 kHz low-pass (both second order). Measured on the generated sound, the energy is centred near 550 Hz and over 90 % of it lies between 80 Hz and 4 kHz.

Pink noise covers the whole range, brown sits in the low end and white in the high end. Green drops both ends, so it sounds like a soft, rounded wash with no rumble and no hiss.

How green noise sounds

Picture wind in a forest or a distant crowd: a steady murmur with nothing sharp and nothing heavy. Because the band is narrow, it works on any speaker, including a phone, and it does not shake a desk the way brown noise can.

Green noise in numbers

The recipe has two filters. The high-pass at 100 Hz removes the rumble, with 12 dB per octave of cut below it. The low-pass at 3 kHz removes the hiss, with 12 dB per octave of cut above it. Between them the sound keeps the 3 dB per octave slope of pink noise. Loudness is matched to the other colours by RMS.

What people use it for

Many people use it to mask background sound while they sleep or work, and like it where pink is too wide and brown too heavy. We make no health claim about it. If a different mix suits you better, switch to pink or brown.

How to use the timer

The Sleep timer offers 15, 30, 60 and 90 minutes and 8 hours. It counts down from the moment you press Play and fades the last 45 seconds. Off cancels it. Closing the tab stops the sound and the timer together.

Other colours

White noise, Pink noise, Brown noise. All four are in the noise generator. To play an exact tone instead, use the tone generator.

FAQ

Is green noise a real standard?

No. Unlike white, pink and brown it has no fixed slope. Sources differ, and most describe a band around 500 Hz. What you hear here is our own definition, written above, so another site's "green noise" will not sound exactly the same.

Why does green noise seem quieter than white noise?

It should not be. The level is matched across colours by RMS, so switching changes the tone and not the loudness. Green sounds calmer because it has no hiss and no rumble, which can read as quieter.

Does green noise help with sleep or focus?

We make no health claim. Many people use steady sound to cover background noise. Try it for a night or two and keep it if you like it.

Can I move the centre frequency of green noise?

Not here. The band is fixed at about 100 Hz to 3 kHz. If you want one exact pitch, use the tone generator, which plays a single frequency from 20 Hz to 20 kHz.

Does the green noise loop without a gap?

The 30 second loop has its last 3 seconds crossfaded into the start, so the join sounds like any other moment. Some browsers leave a very small pause at the loop point. Narrow-band noise has no tune, so it is hard to hear.

More from FLXCode

Share Green Noise