FLXCode GIF Speed Changer

FLXCode apps

Appearance

GIF Speed Changer

Make a GIF play faster or slower, from a quarter of the speed to four times. Nothing is uploaded.

or drop one here

One animated GIF, up to 100 MB.

No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.

Problem or idea? Email us

Quick start

  1. Choose your GIF.
  2. Pick a speed. 2x is the default. Under 1x the GIF slows down.
  3. Press Change speed and watch the preview. If it is too fast or slow, change the speed and press it again.
  4. Download the new GIF.

How a GIF has a speed

A GIF has no frame rate. Each frame says how long it stays on screen, in hundredths of a second. To make the GIF twice as fast, every delay is cut in half. To make it slower, every delay is multiplied.

There is a floor. Browsers show any frame with a delay of 0 or 1 hundredth at 100 ms, which makes a GIF that asked for the fastest speed play slowly. So the shortest delay that plays as written is 20 ms, and this tool never goes under it.

Delays at each speed

A GIF with four frames of 100, 40, 20 and 200 ms at different speeds, from the tool's own code. Frames that hit the 20 ms floor are marked.

SpeedFrame 1Frame 2Frame 3Frame 4TotalFrames at the floor
0.5x200 ms80 ms40 ms400 ms720 ms0
1x100 ms40 ms20 ms200 ms360 ms0
2x50 ms20 ms20 ms100 ms190 ms1
3x30 ms20 ms20 ms70 ms140 ms2
4x30 ms20 ms20 ms50 ms120 ms2

The floor is 20 ms. A frame that would fall under it is held at 20 ms.

How it works

Each delay is divided by the speed, then rounded to the nearest 10 ms and held at 20 ms or more. The picture of each frame is not touched, so the quality is the same.

To go faster than the floor allows, there is another way: remove every 2nd frame in the GIF compressor, which halves the frames and the time together.

Numbers this uses

  • Speeds: 0.25x, 0.5x, 0.75x, 1x, 1.25x, 1.5x, 2x, 3x, 4x.
  • Delay unit: 10 ms (a hundredth of a second). Floor: 20 ms.
  • A frame that already asks for 10 ms or less is read as 100 ms, the way browsers play it.
  • Memory: frames x width x height x 4 bytes, up to 800 MB. Files up to 100 MB.

Limits

  • Slowing down does not add frames, so very slow GIFs look like a slideshow.
  • A GIF where most delays are already 20 ms cannot get faster. The page says how many frames hit the floor.
  • The result is written again with a palette per frame, so the size in KB can differ.

Privacy

Nothing you choose is uploaded or stored. The code that reads and writes GIFs comes from this site and runs in your browser. We count events without cookies, such as "GIF saved" (details).

FAQ

How do I speed up a GIF?

Choose the GIF, pick 2x or more under Speed and press Change speed. Every delay is cut by that factor.

How do I slow down a GIF?

Pick 0.5x or 0.25x. Delays get two or four times longer, so the animation lasts that much longer.

Why can't I make it any faster?

Browsers do not show a frame for less than 20 ms, and they play 10 ms or less as 100 ms. So 20 ms is the floor. To go faster, remove frames in the GIF compressor.

Will slowing down make it smoother?

No. It only holds each frame longer. The tool does not make new frames in between.

Does the speed change the quality?

The pictures stay the same. The file is written again with up to 256 colors per frame, so a GIF that was already coarse stays coarse.

What does 1x do?

It keeps the delays. It is useful if you only want to reverse the GIF or change the repeat count under More changes.

Can I change the speed of just a part of the GIF?

No, the whole GIF changes. For one part, make separate GIFs and join them in an editor.

Is my file uploaded?

No. The file is opened, changed and saved by your browser on this device. It is not sent, stored or put in the address bar. To check, load the page, turn on airplane mode and make a GIF.

More from FLXCode

Share GIF Speed Changer