QR Code Size for Print
How big should a QR code be? Enter what it holds, how far away it is scanned and your printer's dpi, and get the width to print.
https://flxcode.com/qr-code-size-for-print/
Example Version 4, 33×33 modules
- Module size at recommended
- 2.455 mm, 29 printer dots
- Quiet zone, each side
- 9.8 mm (4 modules)
- Pattern without quiet zone
- 81.0 mm
- Distance rule
- 100 mm (distance ÷ 10)
- The smallest size shown is under 2 cm, too small to scan by hand. It only describes what the printer can do.
Widths include the quiet zone, the white border the code needs around it. The minimum is 4 printer dots per module. Distance ÷ 10 is a rule of thumb, not a standard.
A web address of 40 characters is a typical code.
About 20 to 30 cm for a phone in the hand, 1 m for a poster. Below 2 cm most phones struggle, whatever the printer.
I know the version
If you know the version, it wins over the length.
Ready to make the code? Open the QR Code Generator, it has this check built in.
No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.
Problem or idea? Email us
How to use the calculator
- Enter the number of characters in the link or text, or the version if you already have a code.
- Enter the distance the code will be scanned from, in cm.
- Choose your printer's resolution. Laser and inkjet are usually 300 or 600 dpi, label printers 203 or 300.
- Print at the recommended width or bigger. Keep the white border.
- Scan a printed test with your own phone before you print a batch.
Don't have the code yet? Make it in the QR Code Generator. Its Print size panel uses the real code and gives the same numbers.
Examples at medium error correction
| Use | Characters | Distance | Printer | Recommended width |
|---|---|---|---|---|
| Business card, short link | 40 | 25 cm | 600 dpi | 25.1 mm |
| Shelf label | 60 | 50 cm | 300 dpi | 52.1 mm |
| Poster read from 1 m | 60 | 100 cm | 300 dpi | 100.7 mm |
| Shop window, 3 m | 60 | 300 cm | 300 dpi | 302.0 mm |
The business card row matches the rule above: scanned from 25 cm, it comes out near 2.5 cm.
Reference case: version 3 has 29 modules, so 37 with the quiet zone. At 400 dpi and 4 dots per module a module is 0.254 mm and the whole code is 9.398 mm wide.
Minimum QR code size chart
Print width for each QR version, quiet zone included, at medium error correction. The minimum is the smallest that prints sharp (4 printer dots per module). The recommended widths follow the distance rule and are rounded up to whole dots at 300 dpi. Where the minimum is already bigger than the distance needs, the minimum is shown. It is the same maths as the calculator above.
Cite this page
FLXCode. "Minimum QR Code Size Chart." flxcode.com, updated November 15, 2026. https://flxcode.com/qr-code-size-for-print/#min-size-chart
| Version | Modules per side | With quiet zone | Max characters (level M) | Minimum width at 300 dpi (mm) | Minimum width at 600 dpi (mm) | Recommended for 30 cm (mm, 300 dpi) | Recommended for 1 m (mm, 300 dpi) |
|---|---|---|---|---|---|---|---|
| 1 | 21 | 29 | 14 | 9.8 | 4.9 | 31.9 | 100.7 |
| 2 | 25 | 33 | 26 | 11.2 | 5.6 | 30.7 | 100.6 |
| 3 | 29 | 37 | 42 | 12.5 | 6.3 | 31.3 | 100.2 |
| 4 | 33 | 41 | 62 | 13.9 | 6.9 | 31.2 | 100.7 |
| 5 | 37 | 45 | 84 | 15.2 | 7.6 | 30.5 | 102.9 |
| 6 | 41 | 49 | 106 | 16.6 | 8.3 | 33.2 | 103.7 |
| 7 | 45 | 53 | 122 | 17.9 | 9.0 | 31.4 | 103.2 |
| 8 | 49 | 57 | 152 | 19.3 | 9.7 | 33.8 | 101.3 |
| 9 | 53 | 61 | 180 | 20.7 | 10.3 | 31.0 | 103.3 |
| 10 | 57 | 65 | 213 | 22.0 | 11.0 | 33.0 | 104.6 |
| 15 | 77 | 85 | 412 | 28.8 | 14.4 | 36.0 | 100.8 |
| 20 | 97 | 105 | 666 | 35.6 | 17.8 | 35.6 | 106.7 |
| 25 | 117 | 125 | 997 | 42.3 | 21.2 | 42.3 | 105.8 |
Maximum characters counts ordinary text in byte mode. Numbers only fit more, non-Latin text fewer.
What is a rule and what is a rule of thumb
- The quiet zone of 4 modules is in the QR code standard (ISO/IEC 18004).
- At least 4 printer dots per module is a widely used print guideline, not a standard.
- Distance divided by 10 and 2 cm for a hand scan (2.5 cm on a business card) are rules of thumb. Real results depend on the phone, the light and the surface.
Limits
- Square codes only. Logos, rounded modules and colours are not part of the maths.
- Content length is counted as ordinary text. Numbers only make a smaller code, and non-Latin text a bigger one.
- This does not check contrast, material or curved surfaces. Test a print.
Nothing you type is stored or uploaded. We count events without cookies (details).
FAQ
What is the minimum size to print a QR code?
2 cm (0.8 in) for a phone in the hand, 2.5 cm on a business card. Farther away, use the scan distance divided by 10. The printer sets a floor too: it needs at least 4 dots per module to keep edges sharp. At 300 dpi that is 0.34 mm per module, so a version 3 code (29 modules, 37 with the quiet zone) is 12.5 mm wide at the very least.
How big should a QR code be for a given distance?
Distance divided by 10: scan from 100 cm and print about 10 cm wide. It is a guide, not a standard. Use more for dim light, glossy paper or a shaky hand, and keep the quiet zone.
What is the quiet zone?
The empty border around the code. The standard asks for 4 modules on each side. Without it, a scanner cannot tell where the code starts. The widths here include it.
Why does the content length change the size?
More content needs a denser code, which means more modules. Each module has to stay big enough to print and to scan, so a long link needs a bigger print than a short one. Version 1 has 21 modules per side and each version adds 4, up to 177 at version 40.
What is a printer dot per module?
A printer places dots at its resolution, for example 300 per inch. If a module is exactly 4 dots wide, every module prints the same. If it is 4.5 dots, some modules print wider than others and the edges soften. The calculator rounds the recommended size to whole dots.
Do I need the exact size?
No. Bigger is always safe if the space allows it, as long as the quiet zone stays. Use SVG for print so the code scales without blur.
More from FLXCode
QR Code GeneratorNew
Make a QR code for a link, text, Wi-Fi or contact. Static, so it never expires. No sign-up.
Wi-Fi QR Code GeneratorNew
Make a QR code that lets guests join your Wi-Fi, and print it as a card or sign. Made in your browser.
Barcode GeneratorNew
Make EAN-13, UPC-A, EAN-8, Code 128, Code 39 and ITF-14 barcodes with real print sizes. SVG and PNG, no sign-up.
UPC Barcode GeneratorNew
Make a UPC-A barcode from 11 or 12 digits. The check digit is worked out for you. SVG and PNG at real print size.