Noise Generator
Pick a colour and press Play. Set a timer if you want it to fade out by itself.
https://flxcode.com/noise-generator/
Flat: the same energy at every frequency. Bright and hissy.
Falls 3 dB per octave. Softer than white, closer to steady rain.
Falls 6 dB per octave. Deep and rumbly, closer to a distant waterfall.
Our own mix, not a standard: pink noise limited to about 100 Hz to 3 kHz, centred near 500 Hz.
This browser keeps the volume of web pages fixed. Use the volume buttons on your device.
Stopped
Starts quiet on purpose. Keep the speaker away from your ears, and well away from a baby's cot. Nothing is uploaded: the sound is made in your browser.
ToneLab plays white, pink and brown noise with the screen off, with timers and WAV export.
Get the appNo sound?
- iPhone: check the ring/silent switch and the media volume.
- Check the system volume and which output is selected (speakers, headphones, Bluetooth).
- Bluetooth headphones switch to call mode while a microphone is open: sound becomes mono and dull.
- A mono audio setting in accessibility makes left and right sound the same. A web page can't detect it.
- Another tab or app may be using the audio. Close it and press Play again.
No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.
Problem or idea? Email us
Quick start
- Pick a colour. They are matched in loudness, so you can switch while it plays.
- Press Play. It starts quiet. Set the room level with your device volume.
- Choose a sleep timer if you want one. The sound fades out over its last 45 seconds.
- Lock the screen. The sound keeps going, and the lock screen shows a pause button.
The four colours
| Colour | Spectrum | Sounds like |
|---|---|---|
| White | 0 dB per octave | Flat. Bright, like a radio between stations. |
| Pink | −3 dB per octave | Softer, closer to steady rain. |
| Brown | −6 dB per octave | Deep, rumbly, little hiss. |
| Green | band around 500 Hz | Our own mix, not a standard. |
The slopes are power per hertz. Green has no standard definition: ours is pink noise through a 100 Hz high-pass and a 3 kHz low-pass, centred near 500 Hz. Many people use steady noise to mask background sound while they sleep or work. We make no health claims.
Sleep timer
Pick a time under Sleep timer: 15, 30, 60 or 90 minutes, or 8 hours. The countdown starts when you press Play, or at once if the sound is already playing. During the last 45 seconds the sound fades out, then it stops. Tap Off to cancel. The timer needs this page to stay open: it keeps running with the screen off, but not if you close the tab.
How it works
The page makes a 30 second loop of the colour in your browser, in small pieces so the page stays smooth, and plays it through an audio element. That is what lets it run with the screen off, where Web Audio is usually stopped. The loop is crossfaded at its join. Volume and colour changes are small steps of the player volume, so there are no clicks. Nothing is uploaded, and the sound is gone from memory when you stop. The colours are measured, not assumed: slope, level and loop join are checked on the generated samples.
Want to know how loud it is in the room? Use the decibel meter. Want a pure tone? Use the tone generator. Not sure your speakers can reproduce low sound? Run the speaker test.
For a baby: keep the volume low and the speaker well away from the cot. A 2014 study in Pediatrics (Hugh et al.) found all 14 infant sleep machines it tested were above 50 dBA at 30 cm at maximum volume, and three were above 85 dBA at 30 cm.
FAQ
Which colour should I pick?
Start with pink. White is brighter and hissier, brown is deeper, green is a soft mid-range band. They are matched in loudness, so you can switch while it plays and compare.
Will it keep playing with the screen off?
In most cases yes. The page plays a 30 second loop through a normal audio player, not Web Audio, so phones keep it running with the screen locked and show a pause button on the lock screen. Browsers and battery savers differ. Try it for a few minutes before relying on it for the night.
Why is there no volume slider on my iPhone?
iOS does not let a web page set the volume of audio. Use the volume buttons on the phone. The sound is already quiet by design.
What does the sleep timer do?
It fades the sound out over the last 45 seconds and then stops it. Choose 15, 30, 60 or 90 minutes or 8 hours. The page has to stay open, which it can with the screen off.
Is the loop audible?
The 30 second loop is crossfaded for 3 seconds at its join, so the file itself has no seam. A browser can still leave a very small pause at the loop point. For a gapless file, save the 60 s WAV and loop it in another player.
Does it work offline?
Only to load the page. After that the sound is made on your device, so it keeps going if the connection drops. Nothing is uploaded.
More from FLXCode
Tone GeneratorNew
Play any frequency from 1 Hz to 22 kHz. Sine, square, triangle or sawtooth.
Speaker TestNew
Phase, sweep and range. A quick check for speakers and headphones.
Decibel MeterNew
Estimate how loud a place is in dB, with A-weighting, min, average, max and Leq. Calibrate it against a known level.
ToneLab GeneratorAndroid
Tone, noise, binaural and sweep generator for Android. 9 modes, timers, WAV export.