Mic Test
Press Start, say something, and watch the level. Nothing you record is uploaded.
https://flxcode.com/mic-test/
Press Start and allow the microphone. Nothing is uploaded.
With focus in the tool: Space start or stop · Esc stop
- Chrome and Edge: click the icon left of the address bar, set Microphone to Allow, reload.
- Safari on Mac: Safari menu, Settings for This Website, Microphone: Allow. On iPhone: aA menu, Website Settings, Microphone.
- Firefox: click the permissions icon left of the address bar, remove the blocked Microphone entry, press Start again.
- Still blocked? Check the system privacy settings: the browser needs microphone access there too.
- Plug in or switch on a microphone or headset, then press Start again.
- Check the system sound settings: the input device must be enabled.
- Close apps that may hold it: video calls, recorders, other browser tabs.
- Unplug and replug a USB microphone, then press Start again.
Last 10 s
Loudest around – Hz
About clipping
Clipping lights when the signal hits the maximum level. With browser processing on, auto gain keeps peaks down, so clipping is rare. Turn auto gain off to see the raw signal.
- Is it muted? Check the mute switch or key on your headset or laptop.
- Selected microphone: unknown. Pick another under Device and processing.
- Does your system let the browser use the microphone? Check its privacy settings.
Background noise
−90 dBFS Low
Record and play back
The recording stays in this tab's memory. It is never uploaded.
Your browser can't record from a page, so this part is hidden. The level meter still works.
Device and processing
- Sample rate
- –
- Channels
- –
- Latency (estimate)
- –
Browsers clean up the sound before a page gets it. Turn each step off to hear and measure the raw microphone. Changing one re-opens the microphone.
No ads. No account. Nothing you record is uploaded. Check it. We count page events with a daily code.
Problem or idea? Email us
Quick start
- Press Start microphone test and allow the microphone when the browser asks.
- Say something at your normal volume. The bar should move.
- Press Say something for a 5 second check. You get a verdict on the level.
- Record 10 seconds and play it back to hear what others hear.
- Press Stop microphone when you are done. The browser's recording indicator goes off.
What the numbers mean
| Speech level (RMS) | What it means |
|---|---|
| below −50 dBFS | No sound detected. Wrong device, muted, or far too low. |
| −50 to −35 dBFS | Quiet. Move closer or raise the input volume. |
| −35 to −12 dBFS | Good for calls and recording. |
| above −12 dBFS | Loud. Watch the Clipping light. |
| Clipping | The signal hit 0 dBFS and got cut off. It sounds distorted and can't be repaired later. |
These bands are a practical guide for speech, not a standard.
Echo cancellation, noise suppression, auto gain
Your browser runs three cleanup steps on the microphone before a page sees it. They are on by default because they help on calls. Switch one off in the Device and processing box and the test re-opens the microphone without it. Not every browser lets a page do this, and the page tells you when yours ignores the request. Auto gain is the one that matters for clipping: with it on, the browser keeps the level steady, so the Clipping light rarely comes on.
Nothing happens?
- Permission denied: the fix steps appear under the button, for each browser. Check the system privacy settings too.
- No microphone found: plug it in, then press Start again.
- In use by another app: close video calls and recorders, then try again.
- Bluetooth headsets switch to a low quality call mode when the microphone opens. The sample rate in the device box shows it.
- Meter flat with the right device chosen? Check the mute switch on the headset or cable.
- Testing a video call? Check your picture with the webcam test.
- Not sure the recording sounds right? Play it through the speaker test first, so you know your speakers are not the problem.
Accuracy and limits
The meter shows digital level in dBFS, not loudness in the room. We can't calibrate to dB SPL, because we don't know your microphone's sensitivity or the gain set in your system. Use it to compare, to check for clipping and to find a working level. Playback of the recording goes through the browser's own player, so formats differ between browsers.
How it works
The page opens the microphone with the Web Audio API and reads the signal in short blocks to compute the RMS and peak level. The microphone is never connected to your speakers, so there is no feedback. A recording is made with the browser's MediaRecorder and kept in memory until you delete it. We count events without cookies (details).
FAQ
Is my voice uploaded anywhere?
No. The level meter and the recording run in your browser. A recording stays in the memory of this tab and is gone when you delete it or close the page. We only count events, like "started a test".
Why does the page ask for permission?
Browsers never let a page listen without your say-so. The prompt appears only after you press Start, and the browser shows a recording indicator while the microphone is open. Stop releases it.
What does dBFS mean?
Decibels relative to full scale. 0 dBFS is the loudest signal a digital system can hold, and everything else is negative. It is not the loudness of the room in dB SPL, which needs a calibrated microphone.
What level should I aim for?
Keep speech between −35 and −12 dBFS, the Good band on the level history. Below −35 is quiet, above −12 is loud, and a peak that reaches the maximum lights Clipping. This is a practical guide for speech, not a standard.
How do I test my mic for Zoom, Teams or Discord?
Press Start, pick the same microphone your call app uses, and say a sentence at your usual distance. The level should sit in the Good band, between −35 and −12 dBFS, without Clipping. Then open the call app and check that it uses the same input. This page does not talk to those apps, so it only shows what the browser receives.
Why does turning off noise suppression change the sound?
Browsers apply echo cancellation, noise suppression and auto gain by default. They help on calls, but they also squeeze the level and cut quiet sounds. Turning them off shows what the microphone really picks up.
The meter does not move. What now?
Check that the right microphone is selected in the device list, that it is not muted with a hardware switch, and that no other app holds it. Then press Say something and speak close to it.
Is the hum in my mic 50 or 60 Hz?
The background noise check marks a hum at 50 or 60 Hz when it finds one. A steady low drone that matches mains is usually a ground loop, a power adapter or a cable laid next to a power cable. Play the 60 Hz tone to compare the pitch, then unplug things one at a time and run the check again.
Does it work on a phone?
Yes, in current Safari and Chrome. The page releases the microphone when the tab is hidden. On iPhone the browser may also stop it when you switch apps or lock the screen, so you press Start again.
More from FLXCode
Speaker TestNew
Phase, sweep and range. A quick check for speakers and headphones.
Left and Right Speaker TestNew
Press Left, Right and Both, then tell the page what you heard. Works with speakers and headphones.
Tone GeneratorNew
Play any frequency from 1 Hz to 22 kHz. Sine, square, triangle or sawtooth.
Noise GeneratorNew
White, pink, brown and green noise with a sleep timer and fade-out. Plays with the screen off.