FLXCode Brown Noise

FLXCode apps

Appearance

Brown Noise

Press Play. Deep and rumbly. Use headphones or a speaker with some bass.

Falls 6 dB per octave. Deep and rumbly, closer to a distant waterfall.

Sleep timer

Stopped

Starts quiet on purpose. Keep the speaker away from your ears, and well away from a baby's cot. Nothing is uploaded: the sound is made in your browser.

No sound?
  • iPhone: check the ring/silent switch and the media volume.
  • Check the system volume and which output is selected (speakers, headphones, Bluetooth).
  • Bluetooth headphones switch to call mode while a microphone is open: sound becomes mono and dull.
  • A mono audio setting in accessibility makes left and right sound the same. A web page can't detect it.
  • Another tab or app may be using the audio. Close it and press Play again.

No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.

Problem or idea? Email us

What brown noise is

Brown noise falls 6 dB per octave: with each octave up the power per hertz drops to a quarter. It is deep and rumbly, closer to a distant waterfall or a jet engine heard from inside. The name comes from Brownian motion, not the colour (some call it red noise): the signal is a random walk, made here by adding up random steps with a slow leak so it never drifts away.

Pink noise falls 3 dB per octave and white noise is flat, so both carry more high frequencies. Brown has the least hiss of the three.

How brown noise sounds

Most of the energy sits under 150 Hz, so brown noise sounds like thunder far away, a strong river, or the cabin of a plane. There is almost no top end. Through headphones it feels heavy and smooth. Through a phone speaker it nearly disappears, and what remains is a faint scratch.

Brown noise in numbers

Power per hertz falls by a factor of 100 for every tenfold rise in frequency, which is 20 dB per decade. At 100 Hz the level is 20 dB above the level at 1 kHz, and 40 dB above the level at 10 kHz. Our generator adds a leak at about 7 Hz so the very lowest frequencies stay within what a speaker can play.

What people use it for

Many people use it to mask background sound while they sleep, read or work, and prefer it to white noise when hiss is the problem. Producers use it for rumble, distant explosions and engine beds. Headphones show it properly.

How to use the timer

Pick a length from 15 minutes to 8 hours under Sleep timer. The clock starts on Play. The final 45 seconds fade the rumble to nothing and the sound stops. Low frequencies are hard to judge by ear, so set the volume with the sound already running and leave it there before you start the timer.

Other colours

White noise, Pink noise, Green noise. All four are in the noise generator. To play an exact tone instead, use the tone generator.

FAQ

Why does brown noise sound thin on my phone?

Phone and laptop speakers give almost nothing under about 150 Hz, and that is where brown noise lives. Use headphones or a speaker with a woofer. The speaker test shows what your speakers can reach.

Why is it called brown?

After Brownian motion, the random walk of particles described by Robert Brown. It has nothing to do with the colour. Other names are red noise and Brownian noise.

Will brown noise damage my speakers?

At low volume, no. The level is moderate (−15 dBFS RMS at the top of the slider, about −25 at the start position) and the sub-bass is limited by a leak at about 7 Hz. Small speakers can still distort if you push the device volume very high, so turn it up slowly.

Is brown noise safe near a baby?

Keep it quiet and keep the speaker well away from the cot. Deep sound feels less loud than it is, so it is easy to set it too high. A 2014 study in Pediatrics (Hugh et al.) found that infant sleep machines at full volume exceeded 50 dBA at 30 cm, the hospital nursery limit. Ask your paediatrician about your own baby.

Does brown noise keep playing with the phone locked?

Usually. The 30 second loop plays through a normal audio player, which phones keep running with the screen off. Test it for a few minutes first, as some battery savers stop web audio after a while.

More from FLXCode

Share Brown Noise